LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) (2 Of 2) >> Cylinder Head >> Solenoid, Variable Valve Lift >> Removal >> Bank 1 Solenoid 1

Bank 1 Solenoid 1

  1. Remove the air resonator. Refer to RESONATOR, AIR CLEANER, REMOVAL .
    GC0173577Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the wire harness connector (2) from the Variable Valve Lift (VVL) solenoid.
  3. Remove the retaining bolt (1) from the VVL solenoid.
  4. Remove the VVL solenoid from the cylinder head cover.
  5. The O-ring seal can be reused if not damaged.
scientia non olet · About LEMON Manuals