LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) (2 Of 2) >> Cylinder Head >> Rocker Arm, Valve >> Removal

Rocker Arm, Valve: Removal

NOTE:

The LH cylinder head rocker arms are shown, the RH cylinder head rocker arms are similar.

  1. Remove the camshaft(s). Refer to CAMSHAFT, ENGINE, REMOVAL .
    NOTE:

    If the rocker arms are to be reused, identify their positions so that they can be reassembled into their original locations.

    GC0173775Courtesy of CHRYSLER GROUP, LLC
  2. Remove the intake rocker arm(s) (1).
  3. Remove the exhaust rocker arm and hydraulic lifter assembly (2).
    GC0173712Courtesy of CHRYSLER GROUP, LLC
  4. The exhaust rocker arm (2) will come out as an assembly with the hydraulic lifter (3), as it is attached with a retaining clip (1).
scientia non olet · About LEMON Manuals