LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Electrical >> Horns >> Horn System (Service Information) >> Relay, Horn >> Removal

Relay, Horn: Removal

GC0160681Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the cover (1) from the Power Distribution Center (PDC) located on the left side of the engine compartment near the left front fender inner shield (2).
  3. Refer to the appropriate wiring information and the fuse and relay layout map on the underside of the PDC cover for relay identification and cavity location.
  4. Remove the horn relay by grasping it firmly and pulling it straight out from the cavity within the PDC.
scientia non olet · About LEMON Manuals