LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior & Exterior (2 Of 2) >> Seats, First Row >> Mechanism, Rotating >> Installation

Mechanism, Rotating: Installation

  1. Install the rotating mechanism to the riser, install the rotating mechanism bolts and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
    NOTE:

    Make sure to route and fasten the ground wire as noted during removal.

  2. Position the seat onto the rotating mechanism.
  3. Install the bolts and tighten the track to rotating mechanism bolts to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
    GC0184001Courtesy of CHRYSLER GROUP, LLC
  4. Route the wires through the center hole in the rotating mechanism.
  5. Install the cable end to the rotating mechanism latch and clip the cable to the frame.
  6. Install the seat. Refer to SEAT, FRONT, INSTALLATION .
scientia non olet · About LEMON Manuals