Frame, Seat Back, Front: Removal
NOTE:
For the swivel seat configuration, the seat back frame is not serviceable separately.
The entire seat frame assembly must be replaced.
WARNING:
Disable the airbag system before attempting any component diagnosis or service of the front seats, when equipped with front seat air bags. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions may result in accidental airbag deployment and possible serious or fatal injury.
- Remove the seat back cushion and cover assembly. Refer to COVER, SEAT BACK, FRONT, REMOVAL .
- Remove the bolts (2) and remove the seat back frame assembly (1).
- Remove the seat side air bag. Refer to AIR BAG, SEAT, REMOVAL .