LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior & Exterior (2 Of 2) >> Exterior >> Molding, Front Wheel Opening >> Removal >> Front Fascia Molding

Front Fascia Molding

GC0160608Courtesy of CHRYSLER GROUP, LLC
  1. Remove the fasteners (1) securing the wheel house splash shield to the flare.
  2. Using a trim stick or equivalent, release the push-pin fasteners attaching the molding to the fascia and remove the molding.

    (special tool #C-4755, Trim Stick)

scientia non olet · About LEMON Manuals