Door, Sliding: Removal

Courtesy of CHRYSLER GROUP, LLC

Apply masking tape to outside surface of quarter panel below the center roller channel, rearward of the door opening.
Open door.
Apply masking tape to painted areas that may be damaged during removal.
Remove hold open latch cable (1) from latch.

Courtesy of CHRYSLER GROUP, LLC
Support door with suitable holding fixture.
Remove the lower roller hinge bolts (2).

Courtesy of CHRYSLER GROUP, LLC
Remove the center roller hinge bolts (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the upper roller hinge bolts (1) and remove the door.