Switch, Electric Park Brake: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Position the Electric Park Brake (EPB) switch to the EPB bezel.
2. Install the three EPB switch screws (1) and tighten securely.

   Courtesy of CHRYSLER GROUP, LLC

3. Position the EPB switch bezel near the instrument panel and connect the EPB switch wire harness connector (1).

   Courtesy of CHRYSLER GROUP, LLC

4. Position the EPB switch bezel to the instrument panel.
5. Install the EPB switch bezel screw (1) and tighten securely.
6. Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, INSTALLATION .