| RED BRAKE WARNING INDICATOR ON |
1. Parking brake lever not fully released |
1. Release parking brake lever. |
| 2. Parking brake warning lamp switch on parking brake lever |
2. Inspect and replace switch as necessary. |
| 3. Brake fluid level low in reservoir |
3. Fill reservoir. Check entire system for leaks. Repair or replace as required. |
| 4. Brake fluid level switch |
4. Disconnect switch wiring connector. If lamp goes out, replace switch. |
| 5. Instrument Panel Cluster (IPC) problem |
5. Refer to appropriate diagnostic information. |
| 6. Amber Antilock Brake System (ABS) Warning Indicator Lamp also illuminated |
6. Refer to appropriate diagnostic information. |
| 7. ABS Electric Vacuum Pump (EVP) malfunction |
7. Refer to ABS section and appropriate diagnostic information. |
| 8. Electric Parking Brake (EPB) is not released |
8. Check EPB switch position. Refer to ANTILOCK BRAKE SYSTEM (ABS) - DIAGNOSTIC CODE INDEX
. |
| 9. Park brake warning switch |
9. Check Scan Tool for Status. Refer to ANTILOCK BRAKE SYSTEM (ABS) - DIAGNOSTIC CODE INDEX
. |