LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System (Service Information) >> Nozzle, Washer >> Installation

Nozzle, Washer: Installation

GC0160219Courtesy of CHRYSLER GROUP, LLC
  1. Position the washer nozzle (1) to the mounting hole on the top of the appropriate right or left cowl plenum cover/grille panel (2).
  2. Using hand pressure, push firmly and evenly on the top of the nozzle until the integral latches snap into place on the underside of the panel.
  3. From the underside of the cowl plenum cover/grille panel, connect the washer hose to the barbed nipple of the nozzle.
  4. Install the cowl plenum cover/grille panel onto the vehicle. Refer to COVER, COWL PANEL, INSTALLATION .
  5. Confirm proper washer nozzle aiming. Refer to NOZZLE, WASHER, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals