LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Chime/Buzzer/Driver Assist (Service Information) >> Sensor, Blind Spot >> Installation

Sensor, Blind Spot: Installation

  1. If removed, connect the wire harness to the blind spot module.
  2. Fit the blind spot sensor in place, engaging it on the mount and securing the retainers.
  3. Connect the wire harness connector to the body harness connector.
  4. Install the rear fascia side element.
  5. Install the rear tail lamp cluster. Refer to LAMP, TAIL, INSTALLATION .
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals