Camera, Surround View: Operation

• The video cameras are powered by a switched ignition feed.
• The video cameras have a path to ground at all times through a take out and eyelet terminal of the body wire harness secured to the body sheet metal.
• The video camera outputs video signals compatible to the National Television System Committee (NTSC) standard composite video M format, or NTSC-M.
• The video signals are delivered to the Central Vision Processing Module (CVPM).

The hard wired circuits between components related to the cameras may be diagnosed using conventional diagnostic tools and procedures. Refer to the appropriate wiring information. The wiring information includes wiring diagrams, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness connectors, splices and grounds. For proper wire repair, and connector repair procedures, refer to STANDARD PROCEDURE or REMOVAL or INSTALLATION .