Camera, Surround View: Installation: Rear

Courtesy of CHRYSLER GROUP, LLC

1. Install the fasteners (1) securing the camera (2) to the bracket and tighten securely.

   Courtesy of CHRYSLER GROUP, LLC

2. Position the camera and bracket (3) to the center clearance lamp housing, then install the fasteners (1) and tighten securely.
3. Connect the wire harness connector (2).
4. Install the Center High Mount Stop Lamp housing. Refer to LAMP, CLEARANCE, INSTALLATION .
5. Connect the negative battery cable.
6. If equipped with the Surround View Camera System, perform the camera calibration procedure.

   Refer to MODULE, CENTRAL VISION PROCESSING (CVPM), MODULE PROGRAMMING .