Diagnostic Test

CHECK FOR AN ACTIVE DTC 

1. With the scan tool, read TBM2 DTCs and record on the repair order.
2. With the scan tool, erase DTCs.
3. Turn the ignition off and remove the key from the ignition.
4. Turn the ignition on, wait one minute.
5. With the scan tool, read TBM2 DTCs.

   Did the DTC return?

   Yes 

   • Replace the TBM2 in accordance with the Service information. Refer to MODULE, GLOBAL TELEMATICS BOX, REMOVAL .
   • Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .

   No 

   • Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
   • Test complete.