Diagnostic Test

CHECK FOR AN ACTIVE DTC
1. With the scan tool, read Global Telematics Box Module (TBM2) DTCs and record on the repair order.
2. With the scan tool, erase DTCs.
3. With the scan tool, read TBM2 DTCs.
  Did the DTC return?
  
  Yes
  - Go To 2
  No
  - Perform the appropriate INTERMITTENT CONDITION diagnostic procedure. Refer to TESTING FOR AN INTERMITTENT CONDITION .
VERIFY OPERATION OF THE SOS/EMERGENCY CALL BUTTON
NOTE:
Make sure that the SOS/Emergency Call Button is free of debris.
1. With the scan tool, read Global Telematics Box Module (TBM2) DTCs and record on repair order.
2. With the scan tool, erase DTCs.
3. Press and release the SOS/Emergency Call Button three times.
4. Wait 60 seconds.
5. With the scan tool, read DTCs.
  Did the DTC return?
  
  Yes
  - Replace the Inside Rearview Mirror in accordance with the Service Information. Refer to MIRROR, REARVIEW, REMOVAL .
  - Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
  No
  - Test complete.
  - Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .