LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio/Video/Entertainment/Connectivity (Service Information) >> Camera, Rear >> Removal

Camera, Rear: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the Center High Mount Stop Lamp (CHMSL) housing. Refer to LAMP, CLEARANCE, REMOVAL .
  3. Disconnect the wire harness connector.
    GC0160684Courtesy of CHRYSLER GROUP, LLC
  4. Remove the camera (2) retainers (1) and remove the camera from the center clearance lamp housing.