Diagnostic Test

CHECK FOR AN ACTIVE DTC 

1. Turn the ignition on.
2. With the scan tool, read Integrated Center Stack Module (ICS) DTCs and record on the repair order.
3. With the scan tool, erase ICS DTCs.
4. With the scan tool, read ICS DTCs.

   Is the DTC active?

   Yes 

   • Replace the Integrated Center Stack Module (ICS) in accordance with the Service Information. Refer to MODULE, INTEGRATED CENTER STACK (ICSM), REMOVAL .
   • Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .

   No 

   • Perform the TESTING FOR AN INTERMITTENT CONDITION procedure. Refer to TESTING FOR AN INTERMITTENT CONDITION .