(Park Assist Module 2 (PAM) (PAM2) - Electrical Diagnostics)

• Diagnostic Code Index
• DTC Troubleshooting
  • B0118-95-Configuration Mismatch - Incorrect Assembly
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B0126-54-Calibration Missing - Missing Calibration
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B1000-16-Electronic Control Unit - Circuit Voltage Below Threshold
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B1000-17-Electronic Control Unit - Circuit Voltage Above Threshold
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B1000-44-Electronic Control Unit - Data Memory Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B1000-45-Electronic Control Unit - Program Memory Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B1000-46-Electronic Control Unit - Calibration/Parameter Memory Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B1000-47-Electronic Control Unit - Watchdog/Safety MC Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B1000-96-Electronic Control Unit - Component Internal Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B210C-16-Battery Voltage Input - Circuit Voltage Below Threshold
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B210C-17-Battery Voltage Input - Circuit Voltage Above Threshold
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1005-12-Sensor Front Lateral Left - Circuit Short To Battery
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1005-14-Sensor Front Lateral Left - Circuit Short To Ground Or Open
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1005-29-Sensor Front Lateral Left - Signal Signal Invalid
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1006-12-Sensor Rear Lateral Left - Circuit Short To Battery
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1006-14-Sensor Rear Lateral Left - Circuit Short To Ground Or Open
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1006-29-Sensor Rear Lateral Left - Signal Signal Invalid
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1007-12-Sensor Rear LATARAL Right - Circuit Short To Battery
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1007-14-Sensor Rear LATARAL Right - Circuit Short To Ground Or Open
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1008-12-Sensor Front Lateral Right - Circuit Short To Battery
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1008-14-Sensor Front Lateral Right - Circuit Short To Ground Or Open
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1008-29-Sensor Front Lateral Right - Signal Signal Invalid
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1017-16-Sensor Power Supply - Circuit Voltage Below Threshold
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • C1017-17-Sensor Power Supply - Circuit Voltage Above Threshold
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U1001-87-C2 Can - Missing Message
  • U1001-88-C2 Can - Bus Off
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • U1700-86-BCM Body Computer Module - Signal Invalid
  • U1706-87-BSM Brake System Control Module - Missing Message
  • U1724-86-PAM Parking Assistant Module - Signal Invalid
  • U1724-87-PAM Parking Assistant Module - Missing Message
  • U1930-29-Internal Ignition Working Condition Signal - Signal Signal Invalid
  • U1933-86-BCM_Command (From Body Computer Module) - Signal Invalid
  • U1933-87-BCM_Command (From Body Computer Module) - Missing Message
  • U1972-64-PAM_CRC_MCFAILSTS.Info - Signal Plausibility Failure
  • U1975-64-PAM_OPERATIONALMODESTS.Info - Signal Plausibility Failure
  • U1992-64-BCM_Command.OPERATIONALMODESTS - Signal Plausibility Failure