LEMON Manuals
: Even more car manuals for everyone
Home
>>
Dodge and Ram
>>
2023
>>
ProMaster 2500
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Communication Devices
>>
Body Control Module (BCM) - DTCS B1000-44 To B1072-11
>>
DTC Troubleshooting
>>
B1054-23-Column Switch Module (CSM) Washer Commands - Signal Stuck Low
>>
When Monitored
When Monitored
This diagnostic runs continuously when the following conditions are met:
The ignition is on.
The battery voltage is between 10.0 and 16.0 volts.