LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (8HP70 Automatic Transmission (Service Information)) >> Shifter, Transmission >> Installation

Shifter, Transmission: Installation

WARNING: This page is about a different variant/trim than selected.
GC0170239Courtesy of CHRYSLER GROUP, LLC
  1. Position the Electronic Shift Module (ESM) in place and connect the wire harness connector (1).
    GC0184050Courtesy of CHRYSLER GROUP, LLC
  2. Position the ESM (2) to its installed position and secure it with fasteners (1). Tighten the fasteners to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  3. Install the shifter bezel. Refer to BEZEL, SHIFTER, INSTALLATION .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals