LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (8HP70 Automatic Transmission (Service Information)) >> Seal, Torque Converter Hub >> Installation

Seal, Torque Converter Hub: Installation

WARNING: This page is about a different variant/trim than selected.
GC0209081Courtesy of CHRYSLER GROUP, LLC
  1. Position the torque converter hub seal over the input shaft and against the transmission oil pump cover.
  2. Using (special tool #10375, Installer, Oil Pump Cover Oil Seal) install a new torque converter hub seal.
  3. Install the torque converter. Refer to TORQUE CONVERTER, INSTALLATION .
scientia non olet · About LEMON Manuals