Default Action

WARNING: This page is about a different variant/trim than selected.

Malfunction Indicator Lamp (MIL) is illuminated on the first trip that the diagnostic fails.
The Transmission will be placed into Limp-in mode.
The Transmission Control Module (TCM) will not request any positive torque interventions from the Powertrain Control Module (PCM) via CAN.
The TCM will limit the current to the Torque Converter Clutch (TCC) solenoid to 50mA. The TCC will be open.
Maximum system hydraulic pressure will be limited.
Shift adaptation functions will be disabled.
Start/Stop feature, if equipped, will be disabled.