Cylinder Head
WARNING: This page is about a different variant/trim than selected.
CYLINDER HEAD
| DESCRIPTION | N. m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Cylinder Head Bolts | Specific torque and fastener pattern required. Refer to CYLINDER HEAD, INSTALLATION . | |||
| Cylinder Head Cover Bolts | 11 | - | 97 | |
| Exhaust Manifold Bolts | 25 | 19 | - | Do not reuse these fasteners. If removed, a new fastener must be installed and tighten to specifications. |
| Ignition Coil Bolts | 7 | - | 62 | |
| Supercharger to Cyl. Head Bolts | Specific torque and fastener pattern required. Refer to SUPERCHARGER, INSTALLATION . | |||
| Lifter Guide Holder Bolts | 12 | 9 | - | |
| Rocker Arm Bolts | Specific torque and fastener pattern required; follow installation sequence. Refer to ROCKER ARM, VALVE, INSTALLATION . | |||