Engine Specifications: Crankshaft
WARNING: This page is about a different variant/trim than selected.
CRANKSHAFT
| DESCRIPTION | SPECIFICATION | |
|---|---|---|
| Metric | Standard | |
| Main Bearing Journal Diameter | 64.978 - 65.002 mm | 2.5582 - 2.5591 in. |
| Bearing Clearance | 0.023 - 0.052 mm | 0.0009 - 0.0020 in. |
| Out of Round (MAX) | 0.005 mm | 0.0002 in. |
| Taper (MAX) | 0.003 mm | 0.0001 in. |
| End Play | 0.052 - 0.282 mm | 0.002 - 0.011 in. |
| End Play (MAX) | 0.282 mm | 0.011 in. |
| Connecting Rod Journal Diameter | 53.992 - 54.008 mm | 2.1257 - 2.1263 in. |
| Bearing Clearance | 0.016 - 0.056 mm | 0.0006 - 0.0022 in. |
| Out of Round (MAX) | 0.005 mm | 0.0002 in. |
| Taper (MAX) | 0.003 mm | 0.0001 in. |