Engine Specifications: Camshaft
WARNING: This page is about a different variant/trim than selected.
CAMSHAFT
| DESCRIPTION | SPECIFICATION | |
|---|---|---|
| Metric | Standard | |
| Bearing Journal Diameter | ||
| No. 1 | 67.72 mm | 2.67 in. |
| No. 2 | 57.8 mm | 2.27 in. |
| No. 3 | 57.4 mm | 2.26 in. |
| No. 4 | 57.0 mm | 2.24 in. |
| No. 5 | 43.633 mm | 1.72 in. |
| Bearing To Journal Clearance Standard | ||
| No. 1 | 0.040 - 0.080 mm | 0.0015 - 0.003 in. |
| No. 2 | 0.050 -0.090 mm | 0.0019 - 0.0035 in. |
| No. 3 | 0.040 - 0.080 mm | 0.0015 - 0.003 in. |
| No. 4 | 0.050 - 0.090 mm | 0.0019 - 0.0035 in. |
| No. 5 | 0.040 - 0.080 mm | 0.0015 - 0.003 in. |
| Camshaft End Play | 0.080 - 0.290 mm | 0.0031 - 0.0114 in. |
| Duration | 288.0° | |
| Valve Lift (@ Zero Lash) | ||
| Intake | 15.0 mm | 0.591 in. |
| Exhaust | 14.2 mm | 0.559 in. |