LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (6.2L Engine (Service Information)) >> Supercharger System >> Pulley, Idler >> Installation >> Upper

Pulley, Idler: Installation: Upper

WARNING: This page is about a different variant/trim than selected.
GC0170126Courtesy of CHRYSLER GROUP, LLC
  1. Using a NEW  bolt (1) coated with red Loctite®, install the idler pulley and tighten the retaining bolt (2) to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Install the supercharger drive belt (1). Refer to BELT, DRIVE, INSTALLATION .
  3. Install the accessory drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
scientia non olet · About LEMON Manuals