LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (6.2L Engine (Service Information)) >> Lubrication >> Jet, Piston Oil Cooler >> Installation

Jet, Piston Oil Cooler: Installation

WARNING: This page is about a different variant/trim than selected.
GC0209589Courtesy of CHRYSLER GROUP, LLC
  1. Position the piston oil cooler jet (1).
  2. Install the piston oil cooler jet retaining bolt (2) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  3. Install the engine oil pump pickup tube and oil pan. Refer to PAN, OIL, INSTALLATION  .
scientia non olet · About LEMON Manuals