LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (5.7L Engine (Service Information) (1 Of 2)) >> Air Intake System >> Body, Air Cleaner >> Removal >> Resonator Assembly

Resonator Assembly

WARNING: This page is about a different variant/trim than selected.
GC0209731Courtesy of CHRYSLER GROUP, LLC
  1. Remove the oil fill cap (1).
  2. Lift and separate the engine cover retaining grommets from the ball studs and remove the engine cover (2).
    GC0209345Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the electrical connector at the Intake Air Temperature (IAT) sensor (1).
  4. Loosen the clean air hose clamp at the air cleaner housing (2).
  5. Remove the resonator retaining bolt (3).
  6. Loosen the resonator hose clamp at the throttle body (4) and remove the resonator.
scientia non olet · About LEMON Manuals