LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (6.2L Emissions Control) >> Evaporative Emissions >> Sensor, Fuel Tank Pressure >> Installation

Sensor, Fuel Tank Pressure: Installation

WARNING: This page is about a different variant/trim than selected.
GC0199689Courtesy of CHRYSLER GROUP, LLC
  1. Install the fuel tank pressure sensor (4) into the fuel tank and seat the retaining clips (3).
  2. Connect the fuel vapor line quick connect fitting (1).
  3. Install the fuel vapor line in the three retainers (2).
    GC0199692Courtesy of CHRYSLER GROUP, LLC
  4. Connect the fuel tank pressure sensor wire harness connector (1).
  5. Install the fuel tank. Refer to TANK, FUEL, INSTALLATION .
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals