Motor, Shift: Installation

WARNING: This page is about a different variant/trim than selected.

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Before installing the shift motor onto the transfer case, make certain that the shift motor shaft aligns with the transfer case worm shaft accordingly.

Install a NEW shift motor O-ring seal onto the shift motor.
Install the shift motor onto the transfer case.
Install the shift motor bolts. Tighten the shift motor bolts to the proper specification. Refer to TORQUE SPECIFICATIONS .
Install the electrical wiring harness connector onto the shift motor.

Courtesy of CHRYSLER GROUP, LLC
Place the heat shield, install and tighten the fasteners (1) securely.