LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (8HP95 Automatic Transmission (Service Information)) >> Pump, Transmission Oil >> Installation

Pump, Transmission Oil: Installation

WARNING: This page is about a different variant/trim than selected.
GC0154629Courtesy of CHRYSLER GROUP, LLC
  1. Install NEW  inner (1) and outer (2) oil pump O-rings.
  2. Position and firmly press the oil pump in place by hand before drawing it in with bolts.
    GC0209142Courtesy of CHRYSLER GROUP, LLC
  3. Install the NEW  oil pump cover retaining bolts (2) and tighten the bolts as follows:
    GC0209110Courtesy of CHRYSLER GROUP, LLC
    1. In order to seat the oil pump cover properly, pre tighten bolts one, seven and nine to 6 N.m (53 in. lb.).
    2. Working in a clockwise pattern, beginning with number one, tighten to 10 N.m (89 in. lb.).
    3. Working in a clockwise pattern, beginning with number one, tighten an additional 90°.
    GC0209141Courtesy of CHRYSLER GROUP, LLC
  4. Install the NEW  input shaft O-ring (1).
  5. Install the valve body. Refer to VALVE BODY, INSTALLATION .
  6. Install the transmission. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals