LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (6.4L Engine (Service Information)) >> Lubrication >> Sensor, Oil Pressure >> Removal

Sensor, Oil Pressure: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the generator. Refer to GENERATOR, REMOVAL .
  2. Position the generator aside to gain access to the oil pressure sensor.
    GC0209813Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the oil pressure sensor wire harness connector (1).
    GC0209523Courtesy of CHRYSLER GROUP, LLC
  4. Remove the oil pressure sensor (1).
scientia non olet · About LEMON Manuals