LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior And Exterior (1 Of 2) >> Exterior >> Molding, Rear Wheel Opening >> Removal

Molding, Rear Wheel Opening: Removal

GC0209395Courtesy of CHRYSLER GROUP, LLC
  1. Remove the two rear plastic rivets (2).
  2. Using trim stick (special tool #C-4755, Trim Stick) or equivalent, release the eight front push-pin fasteners.
  3. Release the three rear retaining tabs (3) and remove the molding (1).
scientia non olet · About LEMON Manuals