LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Bumpers >> Bumpers >> Fascia, Front >> Installation

Fascia, Front: Installation

GC0200412Courtesy of CHRYSLER GROUP, LLC
  1. Position the fascia (1) up on the vehicle with the upper grille (2) on the radiator support.
  2. Seat the upper headlamp brackets (3) fully.
  3. Seat the fascia on the fender attachment clips (4) and seat fully.
  4. Connect the wire harness connectors to the fascia.
    GC0200476Courtesy of CHRYSLER GROUP, LLC
  5. Install new rivets (2).
  6. Install new rivets (1).
    GC0200415Courtesy of CHRYSLER GROUP, LLC
  7. Position the wheel moldings (1) back and seat fully.
    GC0200523Courtesy of CHRYSLER GROUP, LLC
  8. Position the wheel liners back and install new rivets (1).
  9. Install the fasteners (2) and tighten securely.
    GC0200392Courtesy of CHRYSLER GROUP, LLC
  10. Install the fasteners (2) and tighten securely.
    GC0200430Courtesy of CHRYSLER GROUP, LLC
  11. Seat the upper grille clips (1) fully.
    GC0200516Courtesy of CHRYSLER GROUP, LLC
  12. Position the closeout panels (2) back in place and install the fasteners (3).
  13. Install the hood seal (1) back on the closeout panels (2).
scientia non olet · About LEMON Manuals