LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body - Interior And Exterior (1 Of 2) >> Exterior >> Molding, Body Side >> Removal

Molding, Body Side: Removal

  1. Apply a length of masking tape on the body, parallel to the top edge of the molding to use as a guide, if necessary.
  2. Warm the effected adhesive type molding and body metal to approximately 38°C (100°F) using a suitable heat lamp or heat gun.
  3. Pull stick-on molding from painted surface.
scientia non olet · About LEMON Manuals