LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> Durango GT, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Body - Interior And Exterior (1 Of 2) >> DECKLID/Hatch/Liftgate/Tailgate/Swing Gate >> Liftgate >> Adjustments >> Up/Down And Left/Right Adjustment

Up/Down And Left/Right Adjustment

GC0209035Courtesy of CHRYSLER GROUP, LLC
  1. Remove the liftgate scuff trim. Refer to PLATE, SCUFF, LIFTGATE, REMOVAL .
  2. Loosen the hinge to liftgate bolts (1).
    GC0209031Courtesy of CHRYSLER GROUP, LLC
  3. Loosen the striker screws (2).
  4. Adjust the liftgate up/down position and tighten the hinge bolts to the proper specifications. Refer to TECHNICAL SPECIFICATIONS  and Refer to GAP AND FLUSH, SPECIFICATIONS  for adjustment specifications.
  5. Confirm the lower liftgate in/out position and tighten the striker screws to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  6. Install the liftgate scuff plate trim. Refer to PLATE, SCUFF, LIFTGATE, INSTALLATION .
scientia non olet · About LEMON Manuals