Lamp - Second Or Third Row
- Disconnect and isolate the battery negative cable.
- Carefully insert a trim stick or another suitable wide flat bladed tool between the headliner and the rearward edge of the dome lamp unit. The rearward edge of the lamp has the push buttons for operating the integral reading lamps.
- Gently and evenly pry the lamp downward until the tension clips (1) release the lamp unit from the headliner.
- Pull the front edge of the lamp forward from the mounting hole far enough to disengage the retainers legs on the front of the lamp housing from the mounting hole in the headliner.
- Pull the lamp away from the headliner mounting hole far enough to access and disconnect the wire harness connector from the back of the lamp.
- Remove the lamp from the vehicle.