Bezel, Instrument Panel, Center: Removal
- Remove the Integrated Center Stack (ICS). Refer to MODULE, INTEGRATED CENTER STACK (ICSM), REMOVAL
.
- Remove the fasteners (2) for the upper closeout (1).
- Lift up on the upper closeout (1) and release the tabs (3) from the instrument panel.
- Remove the fastener (1) that secure the instrument panel center bezel (2).
- Using a trim stick or equivalent, release the retaining clips from the instrument panel center bezel (1).
- Lift up on the instrument panel center bezel (1) and release the tabs (2) from the instrument panel. Remove center bezel from the vehicle.