LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2022 >> ProMaster 3500 Van Cargo >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lamps/Lighting - Exterior (Service Information) >> Unit, Front Lamp >> Removal >> Bulbs - Headlamp >> Removal - Bulb - High Beam

Removal - Bulb - High Beam

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the front lamp assembly. Refer to UNIT, FRONT LAMP, REMOVAL .
    GC0160707Courtesy of CHRYSLER GROUP, LLC
  3. Remove the high beam bulb access cover (1) by rotating the cover counter-clockwise.
    GC0171024Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the high beam lamp wire harness connector (1) by pressing and releasing the retaining tab in the direction shown.
  5. Remove the high beam bulb.
scientia non olet · About LEMON Manuals