LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2022 >> ProMaster 3500 Van Cargo >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lamps/Lighting - Exterior (Service Information) >> Lamp, License Plate >> Installation

Lamp, License Plate: Installation

GC0160577Courtesy of CHRYSLER GROUP, LLC
  1. Set the bulb (1) into lamp unit socket.
    GC0160632Courtesy of CHRYSLER GROUP, LLC
  2. Install the lamp cover into place making sure the spring tab (1) is aligned properly in the housing.
    GC0160350Courtesy of CHRYSLER GROUP, LLC
  3. Position the license lamp trim panel to the rear cargo door.
  4. Install and securely tighten the fasteners (1) and connect the wire harness connectors (2) to the lamp housing.
  5. Install the rear cargo door trim panel.
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals