Panel, A-Pillar Trim: Removal

Courtesy of CHRYSLER GROUP, LLC

If equipped, remove the fastener covers (1) then remove the fasteners securing the A-pillar trim (2).

Courtesy of CHRYSLER GROUP, LLC
Using a trim stick or equivalent, gently unclip the A-pillar trim (2) loose from the body, do not try to remove.
Push the A-pillar trim down, in the direction shown, and disengage the top of the A-pillar trim from the headliner (1).
Position the A-pillar trim to disengage the tether clip and disconnect the speaker electrical connector.