Audio/Video/Entertainment/Connectivity (Service Information): Amplifier: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Position the amplifier (3) into place.
2. Install the retainers (1) to the amplifier and amplifier bracket (2).

   Courtesy of CHRYSLER GROUP, LLC

3. Install and tighten the mounting fasteners (2) (3).
4. Connect the wire harness connectors (1).
5. Install the left quarter trim panel. Refer to PANEL, QUARTER TRIM, INSTALLATION .
6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.