In/Out Adjustment

Courtesy of CHRYSLER GROUP, LLC

Using a trim stick (special tool #C-4755, Trim Stick) or equivalent, remove the upper rear headliner trim (2).

Courtesy of CHRYSLER GROUP, LLC
For the upper liftgate adjustments, loosen the six hinge to header fasteners (2 and 3) and adjust to specifications. Refer to GAP AND FLUSH, SPECIFICATIONS .
Tighten the hinge bolts to the proper torque specification. Refer to TORQUE SPECIFICATIONS .

Courtesy of CHRYSLER GROUP, LLC
For the lower liftgate adjustments, remove liftgate scuff trim. Refer to PLATE, SCUFF, LIFTGATE, REMOVAL .
Loosen the striker screws (2) and adjust the liftgate to specifications. Refer to GAP AND FLUSH, SPECIFICATIONS .
Tighten the striker screws to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
Position the upper rear headliner trim and seat fully.
Position liftgate scuff plate trim and seat fully.