Headlamp Delay

The headlamp delay feature includes the headlamp switch, the EMIC, the KIN and the Body Control Module (BCM). This feature has customer programmable delay intervals of 0 seconds (disabled), 30 seconds, 60 seconds and 90 seconds. If the headlamp switch remains in the headlamp ON position until the electronic ignition switch status  messages from the KIN indicate the ignition OFF position is selected, then the headlamps will remain illuminated until after the selected delay interval has elapsed. The park lamps will not stay ON during the headlamp delay interval. The default delay interval is 90 seconds, but can be reprogrammed by the customer using the customer programmable features function of the Electronic Vehicle Information Center (EVIC).