Lamp, Fog, Front: Removal
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the fasteners securing the lower portion of the front wheel house splash shield to the front fascia and fold the splash shield back away far enough to access the front fog lamp. Refer to SHIELD, SPLASH, WHEELHOUSE, REMOVAL
.
- Disconnect the wire harness connector (1) from the front fog lamp (3).
- Remove the fasteners (2) that secure the front fog lamp (2) to the back of the front fascia and remove the lamp.