LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2021 >> ProMaster 2500 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Interior >> Headliner >> Removal

Body - Interior & Exterior: Interior: Headliner: Removal

GC0160497Courtesy of CHRYSLER GROUP, LLC
NOTE:

In the event the headliner is damaged or creased during removal, it will need to be replaced with a new headliner.

  1. Remove the fasteners (2) and the grab handle (3).
  2. Remove both the left and right A-pillar trim. Refer to PANEL, A-PILLAR TRIM, REMOVAL .
  3. Remove both the left and right upper B-pillar trim. Refer to PANEL, B-PILLAR TRIM, UPPER, REMOVAL .
    GC0160429Courtesy of CHRYSLER GROUP, LLC
  4. Remove the fasteners (2) and both left and right sun visors (1).
  5. Remove the dome lamp and disconnect the electrical connector. Refer to LAMP, DOME, REMOVAL .
  6. Remove the front overhead console, if equipped. Refer to CONSOLE, OVERHEAD, FRONT, REMOVAL .
    GC0160428Courtesy of CHRYSLER GROUP, LLC
  7. Remove the fasteners (1) and both left and right sun visor supports (2).
    GC0160204Courtesy of CHRYSLER GROUP, LLC
  8. Remove the push fasteners (1) holding the headliner (2) in place.
  9. Remove the headliner.