Bezel, Instrument Panel, Center: Removal

Courtesy of CHRYSLER GROUP, LLC

1. Remove the shift bezel (1) and disconnect the electrical connector.

   Courtesy of CHRYSLER GROUP, LLC

2. Remove the fastener (1) and remove the bezel.
3. Disconnect the electrical connectors.

   Courtesy of CHRYSLER GROUP, LLC

4. Remove the radio. Refer to RADIO, REMOVAL .
5. Using a trim stick or equivalent, remove the center HVAC vents (1).

   Courtesy of CHRYSLER GROUP, LLC

6. Remove the clip board fasteners (1).

   Courtesy of CHRYSLER GROUP, LLC

7. Remove the clip board (1).

   Courtesy of CHRYSLER GROUP, LLC

8. Remove the top bezel fasteners (1).

   Courtesy of CHRYSLER GROUP, LLC

9. Remove the front bezel fasteners (1).

   Courtesy of CHRYSLER GROUP, LLC

10. Using a trim stick or equivalent, remove the center bezel (1) and disconnect the electrical connectors.