LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2021 >> ProMaster 2500 >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lamps/Lighting - Exterior (Service Information) >> Standard Procedure >> Standard Procedure - Lamp Alignment >> Headlamp Alignment

Headlamp Alignment

GC0160294Courtesy of CHRYSLER GROUP, LLC
  1. Turn the headlamps ON and select the LOW beams.
  2. Block the light of the left headlamp.
  3. Rotate the right headlamp vertical adjustment screw (2) to adjust the right side of the beam pattern to the lamp horizontal reference height as required.
  4. Block the light of the right headlamp.
  5. Rotate the headlamp vertical adjustment screw to adjust the right side of the beam pattern to the lamp horizontal reference height as required.
  6. Use a screwdriver to rotate the headlamp horizontal adjustment screw (1) on each headlamp to adjust as needed.
scientia non olet · About LEMON Manuals