LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Durango R/T, AWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Arm, Lower Control >> Removal

Arm, Lower Control: Removal

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the tire and wheel assembly.
  3. Remove the knuckle. Refer to KNUCKLE, STEERING, REMOVAL .
    NOTE:

    If equipped with four wheel drive, support the half shaft or remove with the lower control arm.

    GC0173647Courtesy of CHRYSLER GROUP, LLC
  4. Remove the shock clevis bracket to lower control arm nut/bolt (6).
    GC0145668Courtesy of CHRYSLER GROUP, LLC
  5. Remove the lower control arm front pivot nut and bolt (4) from the lower control arm (3).
  6. Remove the lower control arm rear pivot vertical bolt and nut (1) and the lower control arm rear pivot horizontal bolt and nut (2) from the lower control arm (3) and remove from the vehicle.
scientia non olet · About LEMON Manuals