LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2020 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (3.6L - DTCS P0632 To P152A) >> DTC Troubleshooting >> P0632-Odometer Not Programmed In Pcm >> Possible Causes

Possible Causes

WARNING: This page is about a different variant/trim than selected.
Possible Causes
THE MILEAGE IS NOT PROGRAMMED INTO THE PCM
POWERTRAIN CONTROL MODULE (PCM)

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  . 

scientia non olet · About LEMON Manuals